BLJCV - HYVAC FLUSHING OIL, 93060

  • MSDS: BLJCV
  • Manufacturer: HYVAC PRODUCTS INC
  • Product Name: HYVAC FLUSHING OIL, 93060
  • National Stock Number: 9150-00N021155
Product Identification

Product ID:HYVAC FLUSHING OIL, 93060
MSDS Date:12/01/1991
FSC:9150
NIIN:00N021155
MSDS Number: BLJCV

Responsible Party
HYVAC PRODUCTS INC
1000 WEST WASHINGTON ST
NORRISTOWN, PA 19401-4438
US

Emergency Phone: 215-278-0355

Info Phone: 215-278-0355

Cage: 0MJA2

Contractor
HYVAC PRODUCTS INC
389 PHOENIXVILLE, PA 19401-0389 US

Telephone: 610-792-0500;610-983-0300

Cage: 0MJA2

Ingredients

SOLVENT REFINED HEAVY DISTILLATE

Fraction By Weight: 100%

OSHA PEL 25 MG/M3 MIST (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:NONE EXPECTED TO 25 MILLIGRAMS
OIL MIST PER CUBIC METER OF AIR. SKIN:PRACTICALLY NON-TOXIC BY SKIN
ABSORPTION. NO SKIN EFFECTS EXPECTED. EYE:MILD IRRITATION.
INGEST:PRACTICALLY TOXIC.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INHAL:NONE NORMALLY REQUIRED. SKIN:WASH WITH SOAP AND WATER.
WASH CLOTHING BEFORE REUSE. EYE:FLUSH WITH WATER FOR AT LEAST 15
MINUTES. INGEST:IF SWALLOWED, GIVE LIQUIDS AND INDUCE VOMITING.
CALL A PHY SICIAN. DO NOT GIVE LIQUIDS OR INDUCE VOMITING IF VICTIM
IS UNCONSCIOUS. SMALL AMOUNTS WHICH MAY ACCIDENTALLY ENTER MOUTH
SHOULD BE RINSED OUT UNTIL NO TASTE OF THIS PRODUCT REMAINS.

Fire Fighting

Flash Point Method:COC
Flash Point:420F,216C
Extinguishing Media:WATER FOG, CHEMICAL FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT WHEN FIRE FIGHTING IN CONFINED SPACES.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:CLEAN UP USING AN OIL ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORAGE PER NFPA CLASS III B.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:VENTILATE AS NEEDED TO MAINTAIN COMPLIANCE WITH
WORKPLACE ENVIRONMENTAL EXPOSURE LIMIT.
Ventilation:MECHANICAL AS NEEDED TO MAINTAIN COMPLIANCE WITH WORKPLACE
ENVIRONMENTAL EXPOSURE LIMITS.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:IF CONTACT IS UNAVOIDABLE, WEAR APPROPRIATE
OIL IMPERVIOUS CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EVAP RATE:1000 X SLOWER THAN ETHYL ETHER.

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:WIDE RANGE
Vapor Pres:<0.0001
Vapor Density:14
Spec Gravity:0.87
Evaporation Rate & Reference:SUP DAT
Solubility in Water:NIL
Appearance and Odor:LIGHT AMBER FLUID-LITTLE ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CARBON MONOXIDE AND ASPHHXIANTS

Disposal

Waste Disposal Methods:FEDERAL, STATE, AND LOCAL REGULATIONS COVER
DISPOSAL OF CHEMCIAL WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.